COMMUNIQUÉ DE PRESSE

par Marimaca Copper Corp. (CVE:MARI)

Pampa Medina Drilling Intersects 102m of 1.0% Cu and 5.1g/t Ag from SPRD-21; 22m of 2.1% Cu and 10g/t Ag from SPRD-18; and 8m of 3.21% Cu and 27.5g/t Ag from SPRD-24

VANCOUVER, BC / ACCESS Newswire / November 19, 2026 / Marimaca Copper Corp. ("Marimaca Copper" or the "Company") (TSX:MARI)(ASX:MC2) is pleased to report further assay results from its ongoing drilling program at the Pampa Medina deposit, located approximately 28km east of the Company's Marimaca Oxide Deposit ("MOD") in Chile's Antofagasta Region (Figure 1). Drilling was completed on 150m centers within the central zone and continues to demonstrate continuity of the mineralized mantos within the target sedimentary horizons. Drillhole SPRD-21 intersected 102m of 1.0% Cu and 5.1g/t Ag from 706m downhole, and 150m to the north, SPRD-18 intersected 68m of 1.1% Cu and 8.7g/t Ag from 634m, including 22m of 2.1% Cu and 11g/t Ag from 668m. Additional extension drilling within the defined 3km x 1.5km area of interest ("AOI") remains ongoing, with broader step-out holes planned to target the northern extension of the Pampa Medina, within the Pampa Norte and Sierra Norte targets (Figure 2).

  • Drilling completed at 150m spacing reinforces the continuity of the mineralization across the central high-grade zone of the deposit
    • Drilling program within central high-grade zone nearing completion, with drill rigs moving to test the continuity of the deposit to the north in Pampa Norte, and west in Sierra Norte (Figure 2)
  • SPRD-21 demonstrates the continuity of the thick, high-grade stacked mantos, unique to the Pampa Medina deposit, with drilling intersecting mineralization into the basement units (Figure 5)
    • Broad interval of 102m of 1.00% Cu and 5.1g/t Ag from 706m (sulphide), including
      • 72m of 1.24% Cu and 6.8g/t Ag from 710m, including
        • 26m of 1.30% Cu and 6.4g/t Ag from 728m
        • 14m of 1.80% Cu and 10.4g/t Ag from 760m
  • SPRD-18 - drilled 300m east of previously released SPRD-17 (Figure 5) - confirmed the continuity of the higher grade sulphide manto
    • 68m of 1.13% Cu and 8.7g/t Ag from 634m (sulphide), including
      • 22m of 1.15% Cu and 16.0g/t Ag from 634m
      • 22m of 2.07% Cu and 10.0g/t Ag from 668m
    • Near-surface oxide mineralization intersected, extending the known oxide footprint by ~150m to the west
      • 68m of 0.36% Cu and 2.7g/t Ag from 142m
  • SPRD-19 intersected the high grade manto at depth, showing continuity of the mineralized sedimentary horizon between previously released SPRD-08B and SPRD-12
    • 34m of 1.36% Cu and 6.6g/t Ag from 832m (sulphide), including
      • 18m of 2.07% Cu and 12.4g/t Ag from 834m, including
        • 8m of 2.63% Cu and 17.8g/t Ag from 840m
  • SPRD-25 - drilled in the northern portion of the deposit 150m south of previously released SMD-01 - intersected mineralization consistent with previous drilling in the area (Figure 7)
    • 54m of 1.12% Cu and 9.9g/t Ag from 320m (mixed), including
      • 22m of 1.55% Cu and 9.9g/t Ag from 352m, including
        • 8m of 1.93% Cu and 16.5g/t Ag from 366m (sulphide)
  • SPRD-24 intersected multiple high-grade stacked mantos within the target sedimentary horizon (Figure 5), including
    • 18m of 1.06% Cu and 5.0g/t Ag from 356m (mixed), including
      • 8m of 1.87% Cu and 11.2g/t Ag from 362m
    • 18m of 1.69% Cu and 13.3g/t Ag from 448m (sulphide), including
      • 8m of 3.21% Cu and 27.5g/t Ag from 454m
  • SPRD-20 - drilled 150m east of previously released SPRD-08B - intersected the target mantos at depth
    • 24m of 0.90% Cu and 2.2g/t Ag from 1,008m (sulphide), including
      • 14m of 1.12% Cu and 3.7g/t Ag from 1,008m
  • SPR-37 extended ultra-high grade manto 300m east of previous drilling within a broader intersection of 146m of 0.34% Cu from 362m (mixed), including
    • 18m of 1.18% Cu and 2.8g/t Ag from 426m (sulphide), including
      • 4m of 3.77% Cu and 10.5g/t Ag from 432m
  • SPRD-28 confirmed the continuation of the sulphide mantos south of the historical oxide footprint, intersecting
    • 26m of 0.92% Cu and 1.9g/t Ag from 306m (sulphide)
  • SPRD-26 intersected near-surface oxide mineralization 300m west of the historical oxide footprint (Figure 6)
    • 20m of 0.93% Cu and 7.1g/t Ag from 162m (oxide)
    • 84m of 0.62% Cu and 3.2g/t Ag from 226m (oxide), including
      • 46m of 1.06% Cu and 6.0g/t Ag from 230m
    • Drilling was interrupted by the late WNW dyke system at depth
  • SPRD-22 and SPRD-23B both intersected near-surface oxide mineralization but were interrupted by late WNW dyke systems at depth

Sergio Rivera, VP Exploration of Marimaca Copper, commented:

"These results continue to build our confidence in the quality and continuity of the Pampa Medina system. Drilling on 150-metre centres is returning thick, high-grade copper-silver mineralization across the central zone, including a broad 102-metre intersection in SPRD-21 and higher-grade intervals such as the 8 metres grading 3.21% copper and 27.5 g/t silver in SPRD-24. Just as importantly, the results are consistent with our geological model of multiple mineralized mantos within the target sedimentary sequence.

"We are nearing completion of the central-zone drilling that will support our maiden resource estimate, while also extending mineralization beyond the historical oxide footprint. The next phase will test the potential for the system to continue north and west, where our geophysical work has identified targets along the broader sedimentary horizon. Pampa Medina is part of a much larger land package, and we believe there is meaningful exploration potential beyond the area drilled to date."

Overview of Pampa Medina

Pampa Medina is a manto-style copper deposit dominantly hosted in Jurassic-Triassic sedimentary units (sandstones, conglomerates, tuffs and black shales) overlain by andesitic volcanics and underlain by an Upper Paleozoic complex of metamorphosed sediments, volcanics and intrusions. Key lithological units are intruded by a dyke swarm and affected by post-mineral normal faulting. Copper was originally identified in near-surface oxide mineralization dominated by atacamite, chrysocolla and chalcocite, and has now been identified in high-grade zones of bornite, chalcopyrite, covellite and chalcocite which extend at depth beyond the oxide-primary transition. Elevated silver grades are present in both oxide and sulphide copper-mineralized zones and are generally correlated with copper grade.

Following Marimaca's consolidation of the project area and surrounding land packages in 2024, the Company reinterpreted all available geological information and developed an updated geological model for Pampa Medina, which identified the lower sedimentary units of interbedded sandstones, shales, tuffs and conglomerates as the priority target horizons for future drilling. Marimaca's 2026 drilling campaign is focused on three priority goals: definition of the high-grade central AOI, delineating the identified oxide extensions, and further step-out drilling to test potential extensions of the broader system identified in geophysical work completed to date.

Figure 1: Regional Map - Marimaca, Pampa Medina and Regional Infrastructure

Figure 2: Pampa Medina within Broader Sierra de Medina Property Block

Figure 3: Current Drilling Results and Drilling to Date within Pampa Medina Area of Interest (AOI)

Figure 4: Plan View of Pampa AOI with Section Lines

Figure 5: Long Section Looking East - Pampa Medina 406,400 E

Figure 6: Long Section Looking East - Pampa Medina 406,500 E

Figure 7: Long Section Looking East - Pampa Medina 406,950 E

HoleTotal Depth (m)From (m)To (m)Intersection (m)% CuTg/t Ag
SPRD-18940

142

210

68

0.36

2.7

Including

178

208

30

0.54

5.2

Including

180

190

10

0.86

7.6

And

204

208

4

1.53

18.0

634

702

68

1.13

8.7

Including

634

656

22

1.15

16.0

And

668

690

22

2.07

10.0

SPRD-19950

272

296

24

0.30

1.5

Including

272

284

12

0.42

3.0

686

694

8

1.42

5.2

832

866

34

1.36

6.6

Including

834

860

26

1.68

8.6

Including

834

852

18

2.07

12.4

Including

840

848

8

2.63

17.8

SPRD-201,080

924

1,064

140

0.36

0.7

Including

980

1,064

84

0.45

0.9

Including

1,004

1,064

60

0.51

1.0

Including

1,008

1,032

24

0.90

2.2

Including

1,008

1,022

14

1.12

3.7

SPRD-21852

248

256

8

0.39

1.8

706

808

102

1.00

5.1

Including

710

782

72

1.24

6.8

Including

728

754

26

1.30

6.4

And

760

774

14

1.80

10.4

SPRD-22850

292

310

18

0.30

2.9

Including

292

300

8

0.32

3.5

336

344

8

0.43

2.5

SPRD-23B866

290

304

14

0.45

Below Detection

Including

296

304

8

0.64

Below Detection

796

832

36

0.23

1.2

Including

796

802

6

0.60

2.0

SPRD-24623

80

112

32

0.51

14.1

Including

100

112

12

1.01

36.3

Including

100

108

8

1.43

53.0

356

374

18

1.06

5.0

Including

356

370

14

1.31

7.0

Including

362

370

8

1.87

11.2

448

466

18

1.69

13.3

Including

454

464

10

2.87

24.0

Including

454

462

8

3.21

Voir toutes les actualités de Marimaca Copper Corp.